1. Moisten the surface to prepare it for cleaning.
2. Apply the diluted cleaner onto the wet, dirty surface by spraying it evenly.
3. Spread the cleaner using the blue spongy cloth included in the kit, allowing it to act for 30-60 seconds for optimal effect.
4. Rinse thoroughly: Remove the Nanotol Cleaner along with any lime and dirt by rinsing with plenty of water.
5. Dry the surface. For a streak-free finish, use a lint-free cloth, squeegee, or the blue Nanotol microfiber cloth also provided in the kit.

1. Spray the Nanotol Protector onto the clean surface, using approximately 6 ml per square meter. This equates to around 20 sprays for smaller bottles and 4-5 for the liter bottle.
2. Spread the coating thinly with a clean, lint-free cloth, preferably using the white sponge cloth included the set. Moisten this cloth slightly beforehand to it more pliable. Work in sections to ensure an even distribution. Take your time with this process.
   TIP: Adopt a checkerboard pattern approach—once left to right, and once top to bottom.
3. Let dry. A gray haze may form, which is barely visible on light and transparent surfaces.
4. Polish the surface with a high-quality microfiber cloth for glass until it feels noticeably smoother. Ideally, use the white Nanotol microfiber cloth included in the set.
   TIP: If the cloth glides over the surface, you've sufficiently activated the Nanotol protective layer.

To ensure you don't mix up the cloths, they come in two colors. Use the blue cloths for cleaning and the white cloths for coating. It's crucial that the cloths used for coating are clean.

Nanotol Bathroom Protector isn't just for bathrooms; it works wonders on windows, mirrors, and even car glass too! While our Bathroom Cleaner effectively removes limescale thanks to its acidic nature (pH 3.5), we don't recommend using it on sensitive surfaces such as marble or car paint. For coating various surfaces, please choose the recommended cleaners and 2-in-1 products for the best results.

No. Nanotol Cleaner perfectly prepares surfaces for coating. Other cleaners, particularly those containing anionic surfactants or solvents, are unsuitable for this purpose. This ensures that your surfaces are not only clean but also perfectly prim for the coating process, guaranteeing the best possible results.