Suitable for all stone surfaces. Repels water and dirt.
This high-tech coating protects your stones from moss and discoloration.
Product Benefits:
How to Apply Nanotol Protector on Stone Surfaces Applying Nanotol Protector for Stone Surfaces is incredibly straightforward.
Simply spray the surface until you feel that the Protector has penetrated every pore. We recommend working twice back-to-back, wet-on-wet. On the second application, the Protector will only fill the still "dry" pores.
Afterward, all you need to do is let the surface dry. We suggest waiting for at least 24 hours. During this period, it should not rain.
Absolutely not.
Nanotol is completely safe for humans and animals.
The Nanotol Protector Stone Surface Coating has been extensively tested and was specifically developed for the end consumer. Since the coating contains no solvents, there is no unpleasant odor during application. The stone surface coating is approved for direct contact with food and meets the requirements of §31 LFGB.
Manufacturer: CeNano GmbH & Co. KG, Paul-Huber-Str. 5, 84405 Dorfen, Germany
Contact: info@cenano.de
from 6,90 € *
Why Coat Roof Tiles?
Over the years, roof tiles lose their protective function due to rain, UV radiation, frost, and aggressive environmental factors. If water can penetrate, it leads to frost damage, moss growth, and unsightly discolorations.
Coating with Nanotol reduces these damages and significantly increases the lifespan. The "roof coating" is a cost-effective alternative to re-roofing when no major damages are present. Porous tiles and roof stones are better at repelling water and dirt.
This measure is significantly less expensive than re-roofing and can last for 10 years – thus, the roof that was actually to be replaced can continue to be used.
The coating does not affect the vapor permeability and thus the mold resistance.
On stone terraces, hydrophobization is a sensible measure for preserving value against moss formation and discoloration. On horizontal surfaces, however, water drainage should always be ensured. A slight incline is enough to allow the rainwater to flow off. If there is any puddle formation, it should be expected that moisture can penetrate the stone due to prolonged water pressure. Coating with Nanotol ensures that contaminants can be removed much more easily.
* All prices are stated gross, including 19% VAT. If you are logged in with an address from an EU country, then the prices will be stated including your country-specific VAT. If you are logged in as a company with a valid VAT ID from an EU country (not Germany) or from a country outside the EU, the prices will be stated without VAT.
All prices are to be understood plus shipping costs. Shipping to Germany is free for orders over 50€.
